Driver_training_home_page Driver_training_LGV training_page Driver_training_PCV_training_page Driver_training_B + E_training_page Driver_training_driver_cpc_page Driver_training_fork_lift_truck_training_page Driver_training_lorry_mounted_crane_training_page Driver_training_other_courses_page contact_TAL_Training_for_all_driver_training_requirements_in_South_Yorkshire
Driver CPC training with TAL Training Ltd
Contact numbers for TAL Training Ltd
Driver CPC training in Sheffield and throughout South Yorkshire

Driver CPC Training Courses

Introduction to Driver CPC Periodic Training

The EU Directive for Driver CPC Periodic Training came into effect for PCV drivers on 10th September 2008 and LGV drivers on 10th September 2009. All drivers, new and existing, will need to complete 35 hours periodic training every five years to ensure that their Driver CPC is current. This is known as Periodic Training.

Only courses that have been approved and are being delivered by training centres that have been approved by the Joint Approvals Unit for Periodic Training (JAUPT), counts towards the Periodic Training requirements.  Periodic Training is designed to confirm and expand, on the existing knowledge of each driver.

TAL Training is approved to deliver periodic Driver CPC training for LGV licence holders. Our J.A.U.P.T. approval number is: AC00611.

How much training is required?
All drivers must undertake 35 hours of Periodic Training every five years. The minimum length of a training course is seven hours.

Who does Driver CPC Periodic Training apply to?
The Driver CPC applies to all new and existing drivers who hold a vocational licence (exemptions on next page)

Existing Drivers (LGV)
All vocational drivers of vehicle categories C1, C or C+E or C1+E, who have acquired rights (passed test before 10th September 2009), will need to complete 35 hours Periodic Training before 10th September 2014.

New Entrants
Persons wishing to acquire cat C1, C or C+E (after September 10th 2009) must pass the Initial Driver CPC exam. Once the initial qualification has been passed, periodic training must then be completed

Course Location:
12e Orgreave Close, Handsworth, Sheffield, S13 9NP

Why Use TAL Training? 

We have been successfully delivering transport training to the haulage and associated industries for over 5 years. We have a reputation within the industry that is second to none.  TAL Training is an approved centre with several awarding bodies, thus ensuring quality and consistency.

Exemptions:

Driver CPC Directive does not apply to drivers of

Vehicles with a maximum authorised speed not exceeding 45km/h

Vehicles used by or under the control of the armed forces, civil defence, the fire service and forces responsible for maintaining public order

Vehicles undergoing road tests for technical development, repair, maintenance purposes, or new or rebuilt vehicles which have not yet been put into service

Vehicles used in states of emergency or assigned to rescue missions

Vehicles used in the course of driving lessons by any person wishing to obtain a driving licence or Driver CPC

Vehicles used for the non-commercial carriage of passengers or goods for personal use

Vehicles carrying material or equipment to be used by the driver in the course of their work, providing that driving the vehicle is not the driver’s principal activity

N.B. This list is not necessarily exhaustive and is intended only as a guide.

Course Duration: 7 hours (7 hours Driver CPC)

Course location: 12e Orgreave Close, Sheffield S13 9NP, or “in company”

Crane Attachment Lorry Mounted Operator Training: Code: CPC - 1

Course objectives:
To enable delegates to safely operate a Crane Attachment Lorry Mounted                                                                             
Operators Legal Obligations (H & S)
Operating Procedures
Pre-use checks
Controls

Safe Loading & Un-Loading

COURSE SYLLABUS

  • Operators’ legal obligations
  • Operating Procedures
  • Pre-Use Checks
  • Controls
  • Safe Loading & Un-Loading
  • Types of Restraint
  • Practical exercise

         

Course price, duration, location and dates

Course Duration: 7 hours (7 hours Driver CPC)

Course location: 12e Orgreave Close Sheffield S13 9NP, or “in company”

This course is slightly more expensive as you will gain the Crane licence.
Course costing: £175.00 + VAT = £205.63 + Driver CPC upload / Admin = £20.00. Total: £225.63.

Course code: (CPC - 1)

Course Dates: Courses are run continuously throughout the year, please phone for next available date.

Drivers’ Hours of Work, Working Time and Tachograph Regulations:-

Code: CPC - 2

Course objectives:

To enable delegates to acquire an understanding of EU and domestic drivers’ hours, working time directive and the use of tachographs (Digital and Analogue).

COURSE SYLLABUS

  • Driver’s legal obligation
  • Scope of the regulations
  • Daily / weekly driving limits
  • Other duties, POAs
  • Daily / weekly rest        
  • Weekly and fortnightly limits
  • Ferry crossings
  • Working time
  • Analogue & Digital Tachograph
  • Manual entries
  • Smart cards         
  • Pictograms
  • Printouts    
  • Practical exercises

 

Course price, duration, location and dates

Course Duration: 7 hours (7 hours Driver CPC)

Maximum number per course: 20

Course location: 12e Orgreave Close Sheffield S13 9NP, or “in company”

Course costing: £95.00 inclusive VAT & Driver CPC upload.

Course Code (CPC - 2)

Course Dates For Your Diary:
Fri 09th Oct 15              Fri 16th Oct 15              Fri 23rd Oct 15              Thu 05 Nov 15 tbc              Thu 19 Nov 15 tbc              Thu 26 Nov 15 tbc             Thu 3 Dec 15 tbc            

Courses are run monthly, please phone for next available date.

Driver’s Health & Safety

Code: CPC - 3

Course objectives:

To provide drivers with sufficient knowledge and understanding of the potential drivers’ health and safety hazards and related risks.                                                                               

COURSE SYLLABUS

  • Driver’s legal obligations
  • HASW Act
  • Manual handling (MH)
  • Workplace safety
  • Working at height
  • Human anatomy
  • Types of  (MH) injuries
  • Safe working on vehicles
  • Slips & trips
  • Use of PPE

         

Course price, duration, location and dates

Course Duration: 7 hours (7 hours Driver CPC)

Maximum number per course: 20

Course location: 12e Orgreave Close Sheffield S13 9NP, or “in company”

Course costing: £95.00 inclusive VAT & Driver CPC upload.

Course code: (CPC - 3)

Course Dates: Courses are run monthly, please phone for next available date

Driver’s Daily Walk-Round Safety Checks, Security of Vehicles and Safe Loading of Vehicles: -

Course objectives

To enable delegates to conduct  a full driver walk-round safety check to ensure that vehicles are fully roadworthy and guidance on defectreporting. To understand vehicle security and the safe  loading of vehicles.

COURSE SYLLABUS

  • Driver’s and operators’ legal obligations
  • Safety inspection procedures
  • Items to be inspected
  • Reporting defects
  • Security of vehicles
  • Load restraining equipment
  • Guide to maintaining vehicles
  • Practical exercise
  • Safe loading of vehicles
  • Axle, gross & train weights
  • Diminishing loads
  • Forces at work on a load

         

Course price, duration, location and dates: TBC

Course Duration: 7 hours (7 hours Driver CPC)

Course location: 12e Orgreave Close Sheffield S13 9NP, or “in company”

Course code: CPC - TBC

 

All our JAUPT approved courses can be conducted “in company” at a time suitable to your operations.

The number of delegates per course is limited to 20, with exception to Code CPC - 1 which is limited to 4.

Course Fees:
The fee for the hire of the instructor’s services is available. Price is available on request.

The Driver CPC registration fee will be £8.75 per delegate per 7 hour course. Travel expenses at 40p.p.mile and accommodation when required will be charged at cost.

Please note: All customers must comply with the Company safety policy and their legal obligations under the Health and Safety at Work Act 1974.  

For more information on Driver CPC or any training requirement, please call our team on 0114 - 2813022

TAL_Training_logo

TAL Training Ltd : 12e Orgreave Close : Handsworth : Sheffield : South Yorkshire S13 9NP

Telephone : 0114 281 3022 or fill out the form on the contact page and we will come back to you
member_of_federation_of_small_businesses